The Steelaire Rackmount

Professional Pricing: $999



The Steelaire Rackmount:

is the solution for player who needs BIG power in a compact head. Equally at home in a rack or sitting gently atop your choice of cabinet, the Steelaire Rackmount represents the future of amplification technology. The Steelaire Rackmount utilizes a patented technology that combines a fully regulated switchmode power supply and proprietary class-D power amplification with our own secret sauce to add warmth and resolution normally reserved for hand-wired boutique tube amplifiers costing many thousands of dollars.

We start with twice:

the normal input impedance to extract the maximum response from your instrument pickups. We finish with a 400 watt internal power amplifier section, which we limit to a maximum output of 200 watts for speaker compatibility. The reserve headroom lets the speaker “breathe” and deliver a bigger sound. The high input and output impedances combine with the speaker’s natural frequency response curve to deliver even more tone than you thought possible, together with amazing amounts of unstressed power to your choice of speakers. Put simply, there is nothing like it.

The Steelaire Rackmount:

delivers its full 200 watts, with plenty of reserve voltage swing, into loads ranging from 2-8 ohms. With selectable input channels, a 4 band EQ, an adjustable limiter, tremolo, and a full-service reverb section, you get a full tool kit to optimize the sound of your instrument. In addition, a unique rear-panel effects loop with 9 volt DC supply allows you to customize the sound of your amp by wiring in accessory pedals of your choice, with integrated control using one of our 6 position remote switches. (Foot controller or leg mount remote, available separately.)

Characteristics:

• Portable: 2RU, 7.7” (19.6cm) deep, 7.2 lbs (3.3kg)
• Powerful: 200 watts (400 watts of internal headroom for maximum voltage swing)
• Dual inputs: Supports multiple instruments or buffered pedal loop
• Input mode selector: Selects Ch1, Mute, Ch2, or Ch1+2
• 4 Band EQ: Bass(100 Hz), Low Mid(500 Hz), High Mid(2kHz), Treble(5kHz)
• Limiter: Fully adjustable from clean to dirty
• Tremolo: Adjustable depth and rate
• Reverb: Adjustable depth, dwell, and tone
• Master: Adjusts output power from 0 to 200 watts
• Dual speaker outputs: 1/4", 2 to 16 ohms
• Remote control connection: Accepts RJ45 cable (Cat 5,6,7,etc.)
• Effects loop: Send, Return, and 9 volt DC out, 200 mA max
• Direct Out: 600 ohm, isolated, balanced, 300 mV peak
• Available accessories: Floor mount or leg mount 6 way remote controller


The Steelaire Rackmount is designed to fit in a standard rack space and does not come with a cover.


Share


Contact your favorite dealer for more information!


Find a Quilter Dealer


Quilter Mach 2 Manual

Click the image to the left to download the manual!


VIDEOS


ACCESSORIES:


Steelaire Remote Leg Mount Controller

Controls Six Amplifier Functions
Bright LED indicators show you which switches are active
Sturdy, road-ready steel chassis and heavy-duty switches
The leg mount remote control is an essential accessory for the steeler. Designed to clamp on a standard leg (13/16") it utilizes a spring mount with padded foam to tightly bind to the leg preventing slippage while preventing damage.
A 15 foot, flexible connector cable is included with the foot controller. If the cable becomes lost or damaged, or if you need a longer cable, a standard networking cable can be used.

$149

Add Leg Mounted Controller to your cart

Steelaire Extension Cab

The Steelaire Extension delivers the ideal 15 inch sealed enclosure sound for demanding players. Weighing in at a mere 34 pounds, the reinforced 15 ply baltic birch is truly an epic and powerful tone.
The Steelaire Extension cabinet, constructed from 15-ply Baltic birch and covered with fabric-backed tolex, is the ultimate in rugged road gear while maintaining a classy boutique appearance. A padded, reinforced nylon cover is included to preserve its good looks for many years of service.
  • Extension Cabinet:34 lbs (16kg), 20 x 23 x 11 in (50.8 x 58.4 x 28 cm)
  • Powerful:300 watts power handling
  • $799

    Add Steelaire Extension to your cart

    Steelaire Pro Cabinet

    The companion to the Steelaire Rackmount unit. This is the same cabinet and speaker that comes with a Steelaire Pro but without an amplifier. The perfect choice for the owner of a Steelaire Rack Mount unit looking for a permanent home.

    $599

    Add Steelaire Pro Cab to your cart

    Two position footswitch for use with the Steelaire, Aviator, or MicroPro Mach 2 amplifiers. Choose this controller if you only want to control channel switching and reverb. For more advanced options try the 2 position selectable or 6 position footswitches. Comes with a 12 Foot Cat 5 Cable.

    $59

    Add 2 Position Channel Switch / Reverb button to cart

    The selectable two position foot controller allows you to select any of the 6 functions for each of the two buttons. Choose this controller if you want more flexibility in which functions you control. Controls any of two of the following functions: Channel switching, Boost, Limiter, Tremolo, Reverb, and FX Loop. Comes with a 12 Foot Cat 5 Cable.

    $69

    Add Selectable 2 position to cart

    The deluxe 6 position foot switch is an essential accessory for the guitarist providing control over all 6 functions of Steelaire or MicroPro amplifiers. Controls any of the following functions: Channel switching, Boost, Limiter, Tremolo, Reverb, and FX Loop. Comes with a 12 Foot Cat 5 Cable.

    $149

    Add six position controller to your cart








    Go Back to Steelaire Series Page

    QUILTER GUARANTEE
    Quilter

    Quilter amplifiers are built to last and are backed by our industry leading warranty. Click Here to learn more.

    CA Prop 65

    For California Prop 65 notice, please go to our support page.