DISCONTINUED : Overdrive 200
url_title

Overdrive 200

Find a dealer
Overdrive 200
RatingRatingRatingRatingRating (5.0/5) 1 Review | Specs/Manual | FAQ | Artists
Price:
Inspired by legendary and almost unobtainable amps, the OVERDRIVE 200 brings several iconic overdrive sounds within reach of the average musician. The incredible 200 watt Quilter Tone Block powerplant is combined with a traditional “tone stack” EQ section to form a classic Clean channel. A three-way Drive channel provides several explosive distortion tones which can be dialed from "mild to wild", plus further adjustments using the Clean channel EQ. BlockDock compatible, uses British type dual footswitch.
The clean channel uses the classic "tone stack" EQ circuit that has propagated down though almost every tube amp from the 60's onwards. An active Mid provides stronger response than the usual passive mid control. The Crunch overdrive is a chiming "surfy" California "clean overdrive", and the Lead overdrive applies more gain with post-overdrive EQ adjustment. If you are looking for that classic Dumble style tone but don't want to spend hundreds of thousands of dollars, this amp is for you.
Important Note:

There are a few ways you can get that "Dumble-Esque" Tone. One is buy one. Typically used. At incredible prices. The second is to buy a copy. Typically used. At incredible prices. Either way, you will never get one this light, reliable, powerful, and definitely not anywhere near this price point. Pick one up today. You'll be thrilled.

Featured Video
Features

(Swipe left or right)

Product Gallery

(Swipe left or right)


OWNER'S MANUAL

SPECIFICATIONS
TitleSpecification
Power Output:0 to 200 watts, 4-8 ohms
AC Power Req.:100-240Vac, 50-60Hz, 250W Max
Input Connections:1/4" mono
Direct Out:XLR-M, 300mv full scale, balanced, ground lifted 10K min.
Speaker 1 Output:8 ohms, 200 W minimum recommended rating
Speaker 2 Output:4 ohms, 200 W minimum recommended rating
H x W x D3.15”(80mm) x 8.5” (216mm) x 5.8” (147mm)
Weight4 lbs (1.8kg)

FAQ
Do I need to register my Quilter product for warranty purposes?
(Click for info)
Is it OK to run with no load on the speaker output?
(Click for info)
Intermittent volume drop or scratchy tone.
(Click for info)
Can I use this amp without a speaker cabinet?
(Click for info)
What will happen if I am plugged in to a mixer and someone sends phantom power?
(Click for info)
Can I plug the headphone out of the amplifier into a Mixer or Monitors?
(Click for info)
Can I run two cabinets with this head?
(Click for info)
Can I use this amp to power speakers inside my dead fender / marshall / orange / blackstar amp?
(Click for info)
Why does the direct out seem weak when going into Line In?
(Click for info)
Do you have any rackmount products?
(Click for info)
I hear a click or a pop when turning the product on is this normal?
(Click for info)
Can a controller control two amps at once?
(Click for info)
I’d like a schematic for a footswitch for the OD200.
(Click for info)
What footswitch do you recommend for the OD 200?
(Click for info)


Artists using the: Overdrive 200

You might also like: