Steelaire : Steelaire Rackmount : $999.00
url_title

$999.00

Steelaire Rackmount

Find a dealer
Buy Now
Steelaire Rackmount
No one has rated this yet. Be the first! | specs/manual | FAQ | artists
Price: $999.00
Equally at home in a rack or sitting gently atop your choice of cabinet, the Steelaire Rackmount represents the future of amplification technology. The Steelaire Rackmount utilizes a patented technology that combines a fully regulated switchmode power supply and proprietary class-D power amplification with our own secret sauce to add warmth and resolution normally reserved for hand-wired boutique tube amplifiers costing many thousands of dollars.

With selectable input channels, a 4 band EQ, an adjustable limiter, tremolo, and a full-service reverb section, you get a full tool kit to optimize the sound of your instrument. In addition, a unique rear-panel effects loop with 9 volt DC supply allows you to customize the sound of your amp by wiring in accessory pedals of your choice, with integrated control using one of our 6 position remote switches. (Foot controller or leg mount remote, available separately.)

Featured Video
Features

(Swipe left or right)

Product Gallery

(Swipe left or right)


OWNER'S MANUAL

SPECIFICATIONS
TitleSpecification
Power Output:200 watts, 4-8 ohms
AC Power Req.:100–240Vac, 50–60 Hz, 250 W
Input Connections:INSTR-1: ¼" mono, INSTR-2: ¼" mono
Effects Loop:Output: ¼" mono, 1V FS (-10dB), 1K ohms
Input: ¼" mono, 50K ohms
Speaker 1 Output:4 ohms, 200 W minimum rating
Speaker 2 Output:4-8 ohms, 200 W minimum rating
Rack Mount Dimensions:2RU, 7.75” (19.7cm) deep, 7.2 lbs (3.3Kg)

FAQ
Do I need to register my Quilter product for warranty purposes?
(Click for info)
Is it OK to run with no load on the speaker output?
(Click for info)
Intermittent volume drop or scratchy tone.
(Click for info)
Can I use this amp without a speaker cabinet?
(Click for info)
What will happen if I am plugged in to a mixer and someone sends phantom power?
(Click for info)
Does this amp work on 230 volts? 100 volts? 120 volts?
(Click for info)
Can I use an “X” ohm speaker with a Quilter amplifier?
(Click for info)
Are all models cab sim out?
(Click for info)
How do I use the direct out?
(Click for info)
Why does the direct out seem weak when going into Line In?
(Click for info)
Can I run two cabinets with this head?
(Click for info)
Can I use this amp to power speakers inside my dead fender / marshall / orange / blackstar amp?
(Click for info)
Do you have any rackmount products?
(Click for info)
Can a controller control two amps at once?
(Click for info)
Why is the footswitch not working on my selectable footswitch?
(Click for info)


Artists using the: Steelaire Rackmount

You might also like: