ARTIST SERIES : Travis Toy 15


Travis Toy 15

Travis Toy 15
No one has rated this yet. Be the first! | specs/manual | FAQ | artists

Price: $1,499.00

The Travis Toy 15 is the ultimate 15 inch steel guitar amplifier modular combo. It is powered by a remove-able Tone Block 202 head for isolation room work, and featuring tilt back legs for live stage use. Developed in conjunction with Quilter and Eminence, it represents the culmination of Travis' lifetime effort to build a legacy of great tone, honest value, and effortless performance for the Steel Guitarist.
The Travis Toy 15, utilizes the custom signature Eminence Double-T 15 speaker and is intended to be the best possible amplification system for today's modern steel guitarist. Features include laser engraved tilt back legs, a signature Double T 15 speaker, a pre-configured and tested Tone Block 202 and a custom artist badge.
Product Gallery

(Swipe left or right)


Power AmplificationTone Block 202 Amplifier
-Power Output:0 to 200 watts, 4-8 ohms
-AC Power Req.:100-240Vac, 50-60Hz, 250W max
-Input Connections:1/4" mono, 2meg impedance.
-Effects Loop: 1V full scale, 1K Send impedance, 47K Return impedance.
-Direct Out (Rear): XLR-M, 300mv full scale, balanced, ground lifted, 10K min.
-Signal Out (Front):TRS, switchable, Line Out pre-Master +4dB balanced, or Headphone post-Master.
-Speaker 1 Output:8 ohms, 200 W minimum recommended rating
-Speaker 2 Output:4 ohms, 200 W minimum recommended rating
-Dimensions:8.5" x 7.25" x 3.25" (21.6cm x 18.4cm x 8.3cm)
-Weight:3 lbs (1.5 kg)
SpeakerEminence Travis Toy Double T 15
Nominal Basket Diameter 15", 381 mm
Nominal Impedance* 4 Ω
-Power Rating**300 W
-Resonance (Fs)56 Hz
-Usable Frequency Range50 Hz - 3.3 kHz
-Sensitivity***101 dB
-DC Resistance (Re)3.18 Ω
-Magnet Weight11 oz.
-Gap Height0.36", 9.1 mm
-Voice Coil Diameter3", 76 mm
Dimensions:H 19 inches (48.3 cm) x W 19.75 inches (50.2 cm) x D 12 inches (30.5 cm)
-Shipping37.8 Pounds (17.15KG)
-Carton Size24" (61 cm) x 23" (58.4 cm) x 16" (40.6 cm)
Included Accessories:
Aluminum Amplifier Retention Plate
Laser Engraved Travis Toy Artist Series Tiltback legs pre-installed
Ballistic Nylon Cover
Right-Angle Speaker Cable
Travis Toy Artist Series Official Product Badge


Artists using the: Travis Toy 15

You might also like: