Steelaire Combo | Quilter Performance Amplification Quilter Labs

The Steelaire Combo

Professional Pricing: $1,599

The Steelaire Combo - Buy it NOW!

The Steelaire Combo:

The Steelaire Combo provides maximum portability with a slimline cabinet housing a front loaded 15" neodynium speaker. 200 clean watts and a rich feature set provide ultimate performance for any musician.
The speaker is the result of a lengthy collaboration between Pat Quilter and Eminence Speakers. We started with Eminence's rugged cast-frame 15 inch platform for maximum durability.

To this we added a 3-inch aluminum voice coil and hyperbolic cone to assure outstanding frequency response, power handling, and freedom from breakup. As a finishing touch, a 4 inch aluminum dome adds a hint of sweet metallic tang, resulting in a creamy full bodied tone with a citrus-y finish. The cabinet is the result of a lengthy series of tone tests conducted with top professional players from coast to coast.

The slimline cabinet is easy to carry and requires minimal space on stage. The front mounted speaker, combined with our calibrated cabinet dimensions, provides maximum clarity of mids and highs, while delivering big clean lows. Our panel of experts frequently need to get on and off stage in less than a minute, so we provided internal room for accessory stowage, and cable routing slots that keep everything tucked safely away.

The slimline Steelaire chassis delivers a full 200 watts, with plenty of reserve voltage swing, into the 4 ohm speaker. With selectable input channels, a 4 band EQ, an adjustable limiter, tremolo, and a full-service reverb section, you get a full tool kit to optimize the sound of your instrument. In addition, a unique back panel effects loop with 9 volt DC supply allows you to wire in accessory pedals of your choice, and control them remotely, using one of our 6 position remote controls. (Leg mount remote, or foot controller, available separately.)


• Portable: 35 Pounds(16kg), 21 x 23 x 9 in (53.4 x 58.4 x 22.9 cm)
• Powerful: 200 watts (400 watts of internal headroom for maximum voltage swing)
• Dual inputs: Supports multiple instruments or buffered pedal loop
• Input mode selector: Selects Ch1, Mute, Ch2, or Ch1+2
• 4 Band EQ: Bass(100 Hz), Low Mid(500 Hz), High Mid(2kHz), Treble(5kHz)
• Limiter: Fully adjustable from clean to dirty
• Tremolo: Adjustable depth and rate
• Reverb: Adjustable depth, dwell, and tone
• Master: Adjusts output power from 0 to 200 watts
• Dual speaker outputs: 1/4", 2 to 16 ohms
• Remote control connection: Accepts RJ45 cable (Cat 5,6,7,etc.)
• Effects loop: Send, Return, and 9 volt DC out, 200 mA max
• Direct Out: 600 ohm, isolated balanced 300 mV peak
• Available accessories: Ballistic nylon cover included. Floor mount or leg mount 6 way remote control and tilt back legs available separately.

The Steelaire Combo includes a ballistic nylon cover!


Contact your favorite dealer for more information!

Find a Quilter Dealer

Quilter Mach 2 Manual

Click the image to the left to download the manual!



Steelaire Remote Leg Mount Controller

Controls Six Amplifier Functions
Bright LED indicators show you which switches are active
Sturdy, road-ready steel chassis and heavy-duty switches
The leg mount remote control is an essential accessory for the steeler. Designed to clamp on a standard leg (13/16") it utilizes a spring mount with padded foam to tightly bind to the leg preventing slippage while preventing damage.
A 15 foot, flexible connector cable is included with the foot controller. If the cable becomes lost or damaged, or if you need a longer cable, a standard networking cable can be used.


Add Leg Mounted Controller to your cart

"Kick Out" Leg Kit

The Steelaire combo is pre-drilled to receive this accessory kit. Package includes the hardware and templates necessary to install them easily on your own with a simple phillips screwdriver!



Two position footswitch for use with the Steelaire, Aviator, or MicroPro Mach 2 amplifiers. Choose this controller if you only want to control channel switching and reverb. For more advanced options try the 2 position selectable or 6 position footswitches. Comes with a 12 Foot Cat 5 Cable.


Add 2 Position Channel Switch / Reverb button to cart

The selectable two position foot controller allows you to select any of the 6 functions for each of the two buttons. Choose this controller if you want more flexibility in which functions you control. Controls any of two of the following functions: Channel switching, Boost, Limiter, Tremolo, Reverb, and FX Loop. Comes with a 12 Foot Cat 5 Cable.


Add Selectable 2 position to cart

The deluxe 6 position foot switch is an essential accessory for the guitarist providing control over all 6 functions of Steelaire or MicroPro amplifiers. Controls any of the following functions: Channel switching, Boost, Limiter, Tremolo, Reverb, and FX Loop. Comes with a 12 Foot Cat 5 Cable.


Add six position controller to your cart

Quilter Steelaire Combo

Quilter Steelaire Combo

Quilter Steelaire Combo

Quilter Steelaire Combo

Quilter Steelaire Combo

Quilter Steelaire Combo

Go Back to Steelaire Series Page