Seraphim Shimmer v2

From Lush Reverb to a Majestic Choir of Angels

Imagine being able to add a little atmospheric sparkle or a full synth-pad effect. Now, imagine switching on-the-fly between this and the Wet Reverb for which Neunaber is famous.

But you also want to keep it simple — less time fiddling with knobs and more time playing. And you want something that doesn’t take up a lot of space on your pedalboard or require a lot of power from your supply.

Introducing the Seraphim Shimmer v2 — everything you loved about the original, plus more.

• Features
  • Add or remove the shimmer layer from the reverb. A long press of the footswitch seamlessly transitions between shimmer and reverb only.
  • Mono input & output makes setup quick and simple. Easy access to inputs and outputs makes this pedal perfect for on-the-go use.
  • Analog dry signal for low noise and zero latency. Maintain the integrity of your source tone.
  • Small footprint with top jacks, the Wet Reverb is pedalboard-friendly. You can easily fit the Wet in any setup, no matter how tight.
  • Powered from a standard 9V pedal power supply (not included), the Seraphim Shimmer draws less than 100 mA and can be powered by your existing pedalboard’s power supply. No need to run a separate power adapter or free up a power port for a hungry, high-current device.
  • Manufactured locally in Orange County, California. Family owned and operated, Neunaber Audio is dedicated to bringing you the highest quality audio effects on the market.
• Effects

  Two effects in 1 pedal. No more worrying if you picked the right pedal, because you’ll have the best of both!

  • Original Shimmer — the popular original algorithm from previous-version shimmer pedals. A classic.
  • New W3T Shimmer — The new magical algorithm from the Immerse Mk II and Wet Reverberator plug-in
• Controls

  Simple 3-knob layout makes it easy to quickly dial in your perfect reverb sound. You’ll spend less time twiddling knobs and more time actually playing.

  • Primary Controls
  • Full Mix knob adjustment from 0% to 100% wet. Create everything from subtle pitch-shifted layers to synthetic, droning pads.
  • Depth - controls the length of the reverb tail; or, the size of the acoustic space
    
  • Shim- controls the amount of shimmer in the effect
  • Alternate Controls - accessed by holding down the Engage footswitch while turning the knob
  • Effect - switch between the original shimmer algorithm and new W3T shimmer algorithm
  • Trails - selects whether the effect signal trails off naturally or cuts off abruptly when the pedal is bypassed
  • Effect Switch
  • Short Press - engage / bypass effect
  • Long Press (1 sec) - add / remove shimmer layer
• Specifications
  Electrical

  Nominal input level	-10 dBV, instrument level
  Input impedance	1 MΩ
  Frequency response, dry / bypassed	20 Hz — 30 kHz, +/-1 dB
  Total harmonic distortion, dry / bypassed	0.01%

  
  Power

  Input	9-12 V DC, 100 mA
  Connector	center-negative, 5.5 mm OD x 2.1 mm ID

  
  Physical

  Dimensions	115 mm L, 64 mm W, 46 mm H / 4.6" L, 2.6" W, 1.9" H
  Weight	190 g / 6.7 oz

  *See User Guide for complete specifications. Specifications subject to change without notice.

• Resources
  • User Guide
  • Seraphim Quick Start Guide

User Friendly

Whether you're a beginner looking for your first pedal or a seasoned pro looking to set it and forget it, this is a fantastic, easy-to-use shimmer. Dial in a multitude of sounds with just 3 knobs.

Low Power Consumption

Use a standard 9 V or 12 V pedal power supply. Or, connect Seraphim v2 to a 100 mA output on a brick supply.

Buffered Bypass

It's great to have a buffer at the end of your signal chain.

Analog Dry Signal

Your dry signal remains analog for low noise and zero latency.