Block Series : OverDrive 202
url_title

$699.00

OverDrive 202

Find a dealer
Buy Now
OverDrive 202
No one has rated this yet. Be the first! | specs/manual | FAQ | artists
Price: $699.00
The OverDrive 202 picks up where the Overdrive 200 left off and features three new voices with their own overdrive channel, reverb, limiter, and a cabinet simulated line out. The three voices range from the newly enhanced Quilter classic Full Q on voice 1, the "bell-like" harmonically rich voice 2, through to the incisive and full bodied attack of voice 3. The Overdrive 202 delivers an appropriate voice for any musical setting. Combine with a UFC-3 and BlockDock 12 HD for the ultimate grab and go rig.
Features 3 voicings, two controllable channels, nine powerful controls including a Limiter that works on both channels, master Reverb, FX Loop with “stealth input” for tracks, pre/post signal and headphone jack with internal cab-sim, traditional Quilter warmth that wakes up any good speaker, and our latest 200W power platform with “go anywhere” AC voltage compatibility. On the rear: RJ-45 footswitch jack, dual-impedance 4 and 8 ohm speaker jacks, and locking AC cord IEC inlet.
Important Note:

If you plan to use with a modeler, try the ToneBlock 202 for the FR functionality. 

Featured Video
Video Gallery

Ron Artis II Live

OverDrive 202 MG

Simon Smith

Product Gallery

(Swipe left or right)


OWNER'S MANUAL

SPECIFICATIONS
TitleSpecification
Power Output:0 to 200 watts, 4-8 ohms
AC Power Req.:100-240Vac, 50-60Hz, 300W maximum
Input Connections: 1/4" mono, 2meg impedance.
Effects Loop:1V full scale, 1K Send impedance, 47K Return impedance.
Signal Out (Front):TRS, switchable, Line Out pre-Master +4dB balanced, or Headphone post-Master.
Speaker 1 Output: 8 ohms, 200 W minimum recommended rating
Speaker 2 Output: 4 ohms, 200 W minimum recommended rating
Dimensions: Height: 2.5” + 0.4” rubber feet (6.35cm + 1cm rubber feet) Width: 8.6” (21.8cm) Depth: 7.3” (18.5cm)
Weight: 4 lbs (1.8kg)

FAQ
Do I need to register my Quilter product for warranty purposes?
(Click for info)
Intermittent volume drop or scratchy tone.
(Click for info)
Can I use an “X” ohm speaker with a Quilter amplifier?
(Click for info)
Can I use this amp to power speakers inside my dead fender / marshall / orange / blackstar amp?
(Click for info)
Does plugging into the headphone jack defeat speaker out?
(Click for info)
Where is the cabinet simulation in the signal chain?
(Click for info)
Why is the footswitch not working on my selectable footswitch?
(Click for info)
How did you come up with the voices? (1,2,3)
(Click for info)


Artists using the: OverDrive 202

You might also like: